PRODUCTS

Production

The production of hydrocarbons needs to be achieved safely, economically, and in compliance with regulatory agencies. While great improvements have been made in understanding produced fluid characteristics, the solutions to daily production problems remains complex. Thorough lab work prior to chemical application and monitoring after chemical application is essential to the success of your chemical program. Protreat provides an extensive range of chemicals to address production problems. Safety Data Sheets can be found here.

Corrosion Inhibitor
Scale Inhibitor
Biocide
Emulsion Breaker
Paraffin Inhibitor
Foamer
Acidizing Package

    • Corrosion Inhibitors are generally amine-type film forming compounds that provide protection in sweet(CO2) and sour (H2S) acid gas environments. They also are formulated to control electrolyic and galvanic corrosion caused by oxygen or bacteria. in fresh water or brines. Products include:

      • WT-922 - Imidazoline/Phosphate Ester Based Inhibitor
      • WT-930 - Quaternary Based Packer Fluid Inhibitor
      • WT-931 - Imidazoline Based Oil Soluble Inhibitor
      • WT-933 - Quaternary Based Pipeline Inhibitor
      • WT-939 - Acid Inhibitor
      • WT-990 - Corrosion Inhibitor
    • Scale inhibitors prevent the precipitation of inorganic solids from supersaturated water which is coproduced with hydrocarbons during production operations. They work by the "threshold effect" to inhibit the formation of calcium carbonate, calcium sulfate, barium sulfate, and other scales. Scale inhibitors can be applied by continuous injection, batch treatment, or squeeze treatment. Products include:

      • WT-953 - Acrylate Based Inhibitor
      • WT-955S - Acrylate Based Squeeze Inhibitor
      • WT-922 - Combination Scale/Corrosion Inhibitor (phosphate/imidazoline type)
      • WT-942 - Combination Scale/Corrosion Inhibitor (phosphonate/quaternary amine type)
      • WT-961 - Combination Scale/Corrosion Inhibitor (phosphonate/quaternary amine/ADBAC type)
    • Biocides are used to control bacteria in drilling fluids, stimulation fluids, and production fluids. Unchecked growth of sulfate reducing bacteria, acid producing bacteria, aerobic bacteria, and aerobic slimes can lead to costly production problems including irreversible reservoir souring. Biocides include:

      • Onyxide 200 - Triazine Type
      • Busan 1058 - Thione Type
      • Bronam 20 - DBNPA Type
      • WSKT 10 - Quat/Isothiazoline Type
      • MECT - Thiocyanate
    • Demulsifiers are utilized to reduce surface and interfacial tension between oil and water droplets, allowing the water component to coalesce into larger drops, and ultimately separate form the oil. Effective breaker chemistry produces a fast drop at the lowest temperature and treating rate, a sharp interface between the oil and water, clean water with little or no oil carryover, and water wet solids that drop into the water phase. Products include:

      • EB-504 - Oil Based Breaker
      • EB-506 - Oil Based Breaker
      • EB-507 - Oil Based Breaker
      • EB-508 - Oil Based Breaker
      • EB-509 - Oil Based Breaker
      • EB-510 - Oil Based Breaker
      • EB-525 - Water Based Acid Non-Emulsifier
      • EB-515 - Solids Wetting Additive
    • Paraffins are naturally occuring components of many crude oils. They generally are > C-18 linear and/or branched hydrocarbons that once precipitated in the wellbore, and can have melting points varying from 82F to over 200F. Paraffin deposition can be controlled by using either polymeric crystal modifiers or dispersants.

      • PT-330 - Oil Based Dispersant
      • PT-225 - Oil Based Polymeric Inhibitor
      • EB-506 - Oil Based Combination Dispersant/Demulsifier
    • Foamers are surfactants utilized to unload water from low pressure gas wells. They are generally injected down the backside where they reduce the density of the water content so that it can be lifted out of the well.

      • WT-971 - Anionic Concentrated Surfactant Blend
    • Our Acidizing Packages includes a variety of surfactants, scale/corrosion inhibitors, non-emulsifiers, biocide, and clay stabilizer. Packages are tailored to each individual well.

      • WT-939 - Acid Corrosion Inhibitor
      • WT-978W - Acidizing Surfactant - Water Base
      • WT-978O - Acidizing Surfactant - Oil Base
      • EB-525 - Non-Emulsifier
      • WT955S - Acrylate Scale Inhibitor
      • WT-982 - Clay Stabalizer
      • WT-990 - Corrosion Inhibitor
      • Citric Acid - Iron Sequestrant
      • WT-978I - Acid Intensifier
      • AT-650 - Asphaltine dissolver/Dispersant
      • Acid 101 - Proprietary Mild Acid Blend
      • Acetic Acid

Drilling

Drilling muds are required to effectively perform the essential tasks for a successful drilling operation. This begins with the need to carry rock cuttings to the surface and out of the well. Additional mud functions include

  • controlling formation pressure
  • suspending cuttings
  • maintaining wellbore stability
  • cooling and lubricating the drill bit
  • minimizing formation damage
  • minimizing environmental impact

Oil entrainment in drilling mud can cause poor chemical performance and hinder recycle operations. Protreat offers additives to help seperate oil and break out lubricants, so that recycle operations are successful.

Lubricants
Reverse Emulsion Breaker
Air Foam Drilling
Drilling Mud Recycling
    • Lubricants for use in drilling operations:

      • WT-785 - Pipe on Pipe Lube
      • WT-788 - Pipe on Pipe Lube
      • WT-787 - Vegetable Oil Base Lube
    • Reverse emulsions are naturally occurring O/W emulsions that require polymeric chemistry in order to separate into individual water and oil phases. They are characterized by a milky tan appearance and do not respond to typical W/O demulsifier chemistry.

      • WT-901 - Reverse Breaker
      • WT-902 - Reverse Breaker
      • WT-904A - Reverse Breaker
    • Air Foam Drilling Chemicals

      • WT-971 Foam Treat - Foamer
      • WT-905 Clear Treat - Water Clarifier
      • WT-934 Steel Treat - Iron Dispersant/Corrosion Inhibitor
      • WT-936 CorrTreat - Corrosion Inhibitor
      • WT-938 CorrTreatH - High Temp Corrosion Inhibitor
      • WT-965 OxiTreat - Oxygen Scavenger
      • WT-974 PipeTreat - Pipe Dope Remover/Pipe Cleaner
      • WT-982 KCL Sub - Clay Stabalizer
      • Onyxide 200 BioTreat - Biocide/H2S Scavenger
    • We offer an extensive line of drilling mud chemicals for both water-based and oil-based muds, including our economic OBM recycling package, developed to remove the solids and ultra-fines contained in the mud, and reclaim the base oil for reuse or sale.

      • WT-810 - Polyacrylamide Breaker
      • WT-833 - Ferric Chloride Enhancer
      • WT-844 - Flocculant - Anionic Powder
      • WT-851 - Drilling Surfactant
      • WT-856 - Surfactant Based Defoamer
      • WT-904A - Demulsifier
      • WT-907 - Coagulant
      • WT-990 - Corrosion Inhibitor
      • Onyxide 200 - Biocide/H2S Scavenger
      • WT-880 - Invert Mud Breaker Package - Surfactant
      • EB-560 - Invert Mud Breaker Package - Breaker
      • WT-848 - Invert Mud Breaker Package - Polymer

Completion

Well completion operations include well stimulations and subsequent plug drillouts/cleanouts to prepare the well for production. SRB and APB contamination is a major concern in these operations. A good biocide program is essential to mitigate bacteria that could cause production impairment during the life of the well through production of corrosive materials such as hydrogen sulfide and carbonic acid, or indirectly through scaling or biomass that restrict well flow capacity. Protreat provides multiple biocides for treating these problems.

Biocides
Friction Reducers
Lubricants
Scale Inhibitors
Clay Stabalizers
Clay Stabalizers
    • Biocides are used to control bacteria in drilling fluids, stimulation fluids, and production fluids. Unchecked growth of sulfate reducing bacteria, acid producing bacteria, aerobic bacteria, and aerobic slimes can lead to costly production problems including irreversible reservoir souring. Biocides include:

      • Onyxide 200 - Triazine Type
      • Busan 1058 - Thione Type
      • Bronam 20 - DBNPA Type
      • WSKT 10 - Quat/Isothiazoline Type
      • MECT - Thiocyanate
    • We offer both anionic and cationic friction reducers for use in fluids whith brine TDS ranging from less than 50,000, up to 250,000. :

      • FR-725 - Anionic Fricton Reducer for brines less than 50,000 TDS
      • FR-750 - Anionic Fricton Reducer for brines 50,000 - 150,000 TDS
      • FR-775 - Cationic Fricton Reducer for brines up to 250,000 TDS
      • FR-780 - Friction Reducer breaker
    • Lubricants for use in drilling and coil tubing operations:

      • WT-785 - Pipe on pipe lubricants that exhibits a very high affinity to metal surfaces
    • Scale inhibitors for use in fracing and coil tubing operations:

      • WT-957 - Multi component, high temperature, traceable scale inhibitor. Provides both short and long term inhibition.
      • WT-958 - Multi component, high temperature, traceable scale inhibitor. For use in the presence of high iron concentrations
    • Clay and shale control chemicals. We may offer TMAC and Choline Chloride chemicals upon request

      • WT-982 - TEA methyl chloride KCL substitute formula
    • Corrosion Inhibitors for use in frac and coil tubing operations

      • WT-933 - Quaternary Based Pipeline Inhibitor